Call to order Mon-Fri, 8-4:30 Central
Ph. 800-456-9414
FLOOR SETTING
ROOF JACKS
RJ-1000F
$468.00
$918.00 ($459 ea.)
$1,347.00 ($449 ea.)
$1,760.00 ($440 ea.)
$2,155.00 ($431 ea.)
$2,526.00 ($421 ea.)
One Jack
Two Jacks
Three Jacks
Four Jacks
Five Jacks
Six Jacks
1000 lb. Capacity per jack
Jack Weight: 99 Lbs. each (fully assembled)
Lifting Heights from the Floor or Marriage Joist
Adjustable from 10' to 17' for pitches up to 5/12
Up to 19'6" w/ included extension tube for pitches up to 7/12
​
-
3 jacks for homes up to 45' long
-
4 jacks for homes up to 65'
-
5 jacks for homes up to 76'
-
6 jacks may be needed for homes up to 80'
​
Please consult the manufacturer
of the home for their lifting point recommendations.
Jack Quantity Guidelines​
The roller jacking foot is not included with the floor setting roof jack
It may be added for $82 per jack
The 4' lifting bracket is provided to lift roofs that do not overhang
The lifting bracket can also be used with the roller jacking foot to spread the load
Each RJ-1000F Jack Includes
-
10" x 10" Base Plate
-
1500 lb. 2 Way Brake Winch w/ Cable
-
Steel Pulley w/ Housing
-
4' Lifting Bracket
-
10' Inside Tube
-
8' Outside Tube
-
4' Extension Tube
-
Optional Roller Foot- $82 ea.
Jacks should be spread at even intervals across roofline
Steel Tubing Specs:
Inside Tube: 3.25" OD .095 wall
Outside Tube: 3.5" OD .083 wall
Attic Jack Conversion Kit
​
Includes:
-
Winch Bracket
-
Channel Foot
-
5' Outer Extension Tube
$104 (each jack)
These parts pin to the 10' inside tube of the ground or floor jack, and adapt it to be a
shorter lighter jack to use from the attic
RJ-1000F INDIVIDUAL PARTS
-
10" x 10" Base Plate
-
2 Way Brake Winch w/ Cable
-
40' Roof Jack Cable
-
Steel Pulley
-
Pulley Housing
-
4' Lifting Bracket
-
Roller Jacking Foot
-
10' 3.25" Inside Tube
-
8' 3.5" Outside Tube
-
4' 3.25" Extension Tube
-
5/8" Pin w/ Clip
$36.00
$141.00
$18.50
$10.00
$10.00
$48.00
$82.00
$72.00
$96.00
$29.00
$4.00
Included parts:
