Call to order Mon-Fri, 8-4:30 Central
Ph. 800-456-9414
GROUND SETTING
ROOF JACKS
RJ-1000G
1000 lb. Capacity per jack
Jack Weight: 109 Lbs. each (fully assembled)
Lifting Heights from the Ground
Adjustable from 11'6" to 18' for pitches up to 5/12
Up to 21'6" w/ included extension tube for pitches up to 7/12
Jack Quantity Guidelines​
​
-
3 jacks for homes up to 45' long
-
4 jacks for homes up to 65'
-
5 jacks for homes up to 76'
-
6 jacks may be needed for homes up to 80'
​
Please consult the manufacturer
of the home for their lifting point recommendations.
$576.00
$1128.00 ($564 ea.)
$1,659.00 ($553 ea.)
$2,164.00 ($541 ea.)
$2,650.00 ($530 ea.)
$3,108.00 ($518 ea.)
One Jack
Two Jacks
Three Jacks
Four Jacks
Five Jacks
Six Jacks
Steel Tubing Specs:
Inside Tube: 3.25" OD .095 wall
Outside Tube: 3.5" OD .083 wall
Each RJ-1000G Jack Includes
-
12" x 12" Base Plate
-
1500 lb. 2 Way Brake Winch w/ Cable
-
Steel Pulley w/ Housing
-
4' Lifting Bracket
-
Roller Jacking Foot
-
10' Inside Tube
-
10' Outside Tube
-
4' Extension Tube
On a roof that overhangs, the roller jacking foot
allows the roof to be lifted from the ground
without climbing up to attach any hardware
The 4' lifting bracket is provided to lift roofs that do not overhang.
The lifting bracket can also be used with the roller jacking foot to spread the load.
Jacks should be spread at even intervals across roofline
$104 (each jack)
Attic Jack Conversion Kit
​
Includes:
-
Winch Bracket
-
Channel Foot
-
5' Outer Extension Tube
These parts pin to the 10' inside tube of the ground or floor jack, and adapt it to be a
shorter lighter jack to use from the attic
RJ-1000G INDIVIDUAL PARTS
-
12" x 12" Base Plate
-
2 Way Brake Winch w/ Cable
-
40' Roof Jack Cable
-
Steel Pulley
-
Pulley Housing
-
4' Lifting Bracket
-
Roller Jacking Foot
-
10' 3.25" Inside Tube
-
10' 3.5" Outside Tube
-
4' 3.25" Extension Tube
-
5/8" Pin w/ Clip
$36.00
$141.00
$18.50
$10.00
$10.00
$48.00
$82.00
$72.00
$116.00
$29.00
$4.00
Included parts:
